Experimental and numerical investigation of second-generation, controlled-diffusion, compressor blades in cascade.
Loading...
Authors
Grove, Darren V.
Subjects
Advisors
Hobson, Garth V.
Date of Issue
1997-06
Date
Publisher
Monterey, California. Naval Postgraduate School
Language
en_US
Abstract
This thesis contains a detailed experimental and numerical investigation of second-generation, controlled-diffusion, compressor-stator blades at an off-design inlet-flow angle of 39%5c Investigation of the blades took place in a low-speed cascade wind tunnel using various experimental procedures. The objective of the wind tunnel study was to characterize the flow field in and around the blades at the off-design angle, and to investigate flow separation near the mid-chord for a high Reynolds number of 640,000. Rake probe survey's were performed upstream and downstream of the lades in order to obtain spanwise total pressure profiles. Surface flow visualization was performed on the blades using a titanium dioxide and kerosene mixture. Blade surface pressure measurements were obtained using a 40-hole instrumented blade from which coefficients of pressure were calculated. A standard optics, two-component, laser-Doppler velocimeter was used to characterize the flow field upstream, in the boundary layer on the suction side of the blades, and in the wake region. A numerical investigation was conducted using the rotor viscous code 3-D developed by Dr. Roderick Chima of NASA Lewis Research Center. Overall, good agreement between flow visualization, blade pressure measurements, laser measurements, and numerical modeling was obtained
Type
Thesis
Description
Series/Report No
Department
Organization
Identifiers
NPS Report Number
Sponsors
Funder
Format
xiv, 75 p.;28 cm.
Citation
Distribution Statement
Approved for public release; distribution is unlimited.
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.