Implementation of multi-frequency modulation with trellis encoding and Viterbi decoding using a digital signal processing board
Loading...
Authors
Wisniewski, John W.
Subjects
Communication
Multi-Frequency Modulation
Trellis coding
Viterbi decoding
Multi-Frequency Modulation
Trellis coding
Viterbi decoding
Advisors
Moose, P. H.
Date of Issue
1991-06
Date
1991 Jun
Publisher
Monterey, California. Naval Postgraduate School
Language
en_US
Abstract
Multi-Frequency Modulation has been the topic of several papers at NPS. In past systems the majority of time required for the generation of the MFM signal was due to the software routine used to implement the FFT. In this report a Digital Signal Processor was used to reduce the time needed to generate the FFT. The use of Trellis coding and Viterbi decoding on a Digital Signal Processor was also investigated. Assembly language programs for three encoder/ decoder systems were developed. The first uses a 16 QAM signal, the second uses a 2/3 rate convolutional encoder and Viterbi decoder and the third uses the V.32 convolutional encoder and a Viterbi decoder.
Type
Thesis
Description
Series/Report No
Department
Electrical Engineering
Organization
Naval Postgraduate School (U.S.)
Identifiers
NPS Report Number
Sponsors
Funder
Format
86 p.;28 cm.
Citation
Distribution Statement
Approved for public release; distribution is unlimited.
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.