Surface roughness effects on nucleate boiling heat transfer rates
| dc.contributor.advisor | Pucci, Paul F. | |
| dc.contributor.author | Gibson, James C., Jr. | |
| dc.contributor.corporate | Naval Postgraduate School (U.S.) | |
| dc.contributor.department | Mechanical Engineering | |
| dc.date | 1962 | |
| dc.date.accessioned | 2012-08-29T23:36:25Z | |
| dc.date.available | 2012-08-29T23:36:25Z | |
| dc.date.issued | 1962 | |
| dc.description.abstract | Heat transfer rates were measured for pool boiling, in the nucleate regime at one atmosphere pressure, for distilled water on a horizontal, flat, stainless steel (Type 304) plate. The heating surfaces were prepared with different degrees of roughness by common machining operations. Heat was supplied to the specimen by a nichrome wire heating coil mounted in a Lavite block which supported the specimen. | en_US |
| dc.description.distributionstatement | Approved for public release; distribution is unlimited. | |
| dc.description.service | Lieutenant, United States Navy | en_US |
| dc.description.uri | http://archive.org/details/surfaceroughness1094513224 | |
| dc.identifier.uri | https://hdl.handle.net/10945/13224 | |
| dc.language.iso | en_US | |
| dc.rights | This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States. | en_US |
| dc.subject.lcsh | Mechanical engineering | en_US |
| dc.title | Surface roughness effects on nucleate boiling heat transfer rates | en_US |
| dc.type | Thesis | en_US |
| dspace.entity.type | Publication | |
| etd.thesisdegree.discipline | Mechanical Engineering | en_US |
| etd.thesisdegree.grantor | Naval Postgraduate School | en_US |
| etd.thesisdegree.level | Masters | en_US |
| etd.thesisdegree.name | M.S. in Mechanical Engineering | en_US |
Files
Original bundle
1 - 1 of 1