An investigation of the effects of shear on the compressive strength of plating
Loading...
Authors
Ballard, John Adams
Lennon, Bernard Charles
Subjects
Advisors
Norris, Charles
Date of Issue
1949-05
Date
Publisher
Massachusetts Institute of Technology
Language
en_US
Abstract
The purpose of this investigation was to design,
construct, and test a device which was to be capable of
applying a compressive force and a shearing force to a
plane panel of plate. This device was then to be used
to determine the combined effect of shear and compression
on a panel of plate of a length-to-width ratio corresponding
to the representative ratio of plating dimensions
most often found in ship construction.
Type
Thesis
Description
This thesis document was issued under the authority of another institution, not NPS. At the time it was written, a copy was added to the NPS Library collection for reasons not now known. It has been included in the digital archive for its historical value to NPS. Not believed to be a CIVINS (Civilian Institutions) title.
Series/Report No
Department
Dept. of Naval Architecture and Marine Engineering
Organization
Identifiers
NPS Report Number
Sponsors
Funder
Format
Citation
Distribution Statement
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.