From High-Entropy Ceramics to Compositionally-Complex Ceramics: A Case Study of Fluorite Oxides

Loading...
Thumbnail Image
Authors
Wright, Andrew J.
Wang, Qingyang
Huang, Chuying
Nietoc, Andy
Chen, Renkun
Luo, Jian
Advisors
Second Readers
Subjects
High-Entropy ceramics(HECs)
Compositionally-Complex ceramics (CCCs)
Multi-Principal cation ceramics (MPCCs)
Thermal conductivity
Thermal barrier coatings
Date of Issue
2020-01-17
Date
Publisher
ArXiv
Language
Abstract
Using fluorite oxides as an example, this study broadens high-entropy ceramics (HECs) to compositionally-complex ceramics (CCCs) or multi-principal cation ceramics (MPCCs) to include medium-entropy and/or non-equimolar compositions. Nine compositions of compositionally-complex fluorite oxides (CCFOs) with the general formula of (Hf1/3Zr1/3Ce1/3)1-x(Y1/2X1/2)xO2-δ (X = Yb, Ca, and Gd; x = 0.4, 0.148, and 0.058) are fabricated. The phase stability, mechanical properties, and thermal conductivities are measured. Compared with yttria-stabilized zirconia, these CCFOs exhibit increased cubic phase stability and reduced thermal conductivity, while retaining high Young’s modulus (∼210 GPa) and nanohardness (∼18 GPa). Moreover, the temperature-dependent thermal conductivity in the non-equimolar CCFOs shows an amorphous-like behavior. In comparison with their equimolar high-entropy counterparts, the medium-entropy non-equimolar CCFOs exhibit even lower thermal conductivity (k) while maintaining high modulus (E), thereby achieving higher E/k ratios. These results suggest a new direction to achieve thermally-insulative yet stiff CCCs (MPCCs) via exploring non-equimolar and/or medium-entropy compositions.
Type
Preprint
Description
The article of record as published may be found at https://doi.org/10.1016/j.jeurceramsoc.2020.01.015
Series/Report No
Department
Mechanical and Aerospace Engineering (MAE)
Organization
Identifiers
NPS Report Number
Sponsors
This material is primarily based upon work supported by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under Solar 17 Energy Technologies Office (SETO) Agreement Number EE0008529 (for Feb 2019 to July 2020). J.L. and A.W. also acknowledge earlier (before Feb 2019) and partial support of a Vannevar Bush Faculty Fellowship (via ONR Grant No. N00014-16-1-2569) and an associated Laboratory-University Collaboration Initiative (LUCI) program to investigate interfaces in thermal and environmental barrier coatings, which subsequently led to this new direction of HEFOs and CCFOs.
Funding
This material is primarily based upon work supported by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under Solar 17 Energy Technologies Office (SETO) Agreement Number EE0008529 (for Feb 2019 to July 2020). J.L. and A.W. also acknowledge earlier (before Feb 2019) and partial support of a Vannevar Bush Faculty Fellowship (via ONR Grant No. N00014-16-1-2569) and an associated Laboratory-University Collaboration Initiative (LUCI) program to investigate interfaces in thermal and environmental barrier coatings, which subsequently led to this new direction of HEFOs and CCFOs.
Format
39 p.
Citation
Wright, Andrew J., et al. "From High-Entropy Ceramics to Compositionally-Complex Ceramics: A Case Study of Fluorite Oxides." arXiv preprint arXiv:1912.11742 (2019).
Distribution Statement
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.
Collections