A hot-stage Atomic Force Microscope for the measurement of plastic deformation in metallic thin films during thermal cycling
Loading...
Authors
Shultz, Thomas E.
Subjects
Advisors
Dutta, Indranath
Date of Issue
2001-06
Date
June 2001
Publisher
Language
Abstract
An Atomic Force Microscope is equipped with a hot-stage and a vacuum system in order to enable in-situ studies of plastic deformation and interfacial sliding of thin metallic films on Si substrates during thermal cycling. The apparatus can reach sample temperatures of lOO deg C while maintaining optimum resolution. The system will allow future in-situ thermal cycling experiments on microelectronic devices in a protected environment to provide insight into the role of plastic deformation in metallic thin films on the stability of future generations of device structures. The details of the design, along with the performance limitations of the system are discussed. Preliminary results demonstrating the performance of the system at an elevated temperature are presented. Limited post-situ results from direct measurement of the plastic deformation of thin Cu films on Si substrates induced by thermal cycling are also presented, primarily with the objective of establishing the need for detailed in-situ studies. While artifacts such as permanent dimensional changes of the film are observed post-situ, a detailed mechanistic understanding of the interaction between the temperature-dependent stress state of the film and the resultant inelastic deformation within the film and at the interface can only be obtained through in-situ experiments.
Type
Thesis
Description
Series/Report No
Department
Mechanical Engineering
Organization
Identifiers
NPS Report Number
Sponsors
Funder
Format
x, 75 p. ; 28 cm.
Citation
Distribution Statement
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.