Show simple item record

dc.contributor.advisorPucci, Paul F.
dc.contributor.authorBruno, Marco Joseph
dc.date.accessioned2012-08-29T23:31:26Z
dc.date.available2012-08-29T23:31:26Z
dc.date.issued1968-09
dc.identifier.urihttp://hdl.handle.net/10945/12184
dc.description.abstractTwo new transient testing techniques were evaluated; the centrold method developed by Kohlmayr and the time zero intercept technique. The zero intercept method was found to be the most promising of the two but is limited to values of N < 2.5. The centrold technique can be used effectively when the value of N is less than 5.0. A heater system made of .001 inch diameter nichrome wire was designed and tested to determine its effect on the transient testing of matrix type heat exchangers. Because the design showed no improvement in the test results and was unreliable its use was discontinued.en_US
dc.description.urihttp://archive.org/details/experimentaltech1094512184
dc.language.isoen_US
dc.publisherMonterey, California. Naval Postgraduate Schoolen_US
dc.rightsThis publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.en_US
dc.titleExperimental Techniques to Determine Ntu of Compact Heat Exchanger Surfacesen_US
dc.typeThesisen_US
dc.contributor.departmentMechanical Engineering
dc.description.serviceLieutenant, United States Navyen_US
etd.thesisdegree.nameM.S. in Mechanical Engineeringen_US
etd.thesisdegree.levelMastersen_US
etd.thesisdegree.disciplineMechanical Engineeringen_US
etd.thesisdegree.grantorNaval Postgraduate Schoolen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record