General Motors single cylinder diesel engine Model 1-53x3 installation and tests.
McCord, Stanley R.
Pucci, Paul F.
MetadataShow full item record
The GM 1-53X3 diesel engine was purchased by the Postgraduate School to be installed as a two cycle diesel engine, laboratory instruction unit. The objectives of this thesis were to design or select and integrate the necessary components to provide a laboratory test engine, to determine and document an initial set of performance data and to record a complete description of the entire installation. The engine is described. The parameters demonstrating the engine performance are determined, presented and discussed. In the appendices a detailed description of the component systems is presented. Illustrations and graphs have been utilized to make system descriptions and performance characteristics clear. Operating instructions, safety precautions and sample calculations are discussed. The engine is ready for student laboratory exercises. The instruments will permit exercises to determine output power, fuel consumption, air consumption and power distribution among the various energy loss factors. The engine is adaptable to other exercises with additional instrumentation. These modifications are discussed.
Approved for public release; distribution is unlimited
Showing items related by title, author, creator and subject.
Hardy, H.D.; McConnell, R.E.; Bell, R.W. (Monterey, California. Naval Postgraduate School, 1964);Acceptance testing of the Turboprop Test Chamber was conducted during the weeks of 27 April and 4 May 1964. The tests were conducted by personnel from the Overhaul and Repair Department, Alameda Naval Air Station, from ...
A methodology for multidisciplinary decision making for a surface combatant main engine selection problem Tosun, Mustafa G. (Monterey, California: Naval Postgraduate School, 2014-06);In the ship design process, delivering optimum performance while reducing development and construction costs are key considerations. A great amount of optimization effort should be done before progressing on a project. ...
Hofler, Thomas J. (Monterey, California. Naval Postgraduate School, 1995-07-27); NPS-PH-95-002A new design for a thermoacoustic heat driven cooler is proposed and has been analyzed via a numerical model. The engine layout incorporates a half wavelength or can be run in a full wavelength with dual prime movers and ...