An investigation into one method of obtaining accurate bearing rates from passive sonar bearings.
Vaughan, Edward Bressie
MetadataShow full item record
The need for a device capable of measuring bearing rate is shown. Some specifications for such a device are set forth. Several possible means of obtaining bearing rate from continuous passive sonar bearings are then considered. The feasibility of one of these means is then studied in detail through the development of an "initial" and then a "final" pro- totype. A conclusion is reached that the "final" device as constructed performs adequately. Several recommendations for improvement of this "final" device are suggested.
Showing items related by title, author, creator and subject.
Tsai, Shang-Yuan (Monterey California. Naval Postgraduate School, 2004-12);As more and more devices with a variety of capabilities are Internet-capable, device independence becomes a big issue when we would like the information that we request to be correctly displayed. This thesis introduces and ...
Kwon, Y.W.; Ponshock, T.; Molitoris, J.D. (2016-12);A new mechanical device was developed to apply internal pressure loading to a cylindrical structure in order to determine its failure strength and failure mode under pressure loading. The device can be used for a uniaxial ...
Thomas, Matthew J. (Monterey, California: Naval Postgraduate School, 2015-09);This research examines the potential for the conjunction between photovoltaic (PV) and thermophotovoltaic (TPV) technologies for spacecraft power production. There is sufficient overlap between the sources of energy used ...