Gas absorption by atomization
Branscome, James Roscoe
Simmons, C. W.
MetadataShow full item record
The purpose of this work was to test the applicability of atomization to absorption by means of a two-fluid or gas-atomization nozzle. Since absorption depends directly on the amount of liquid surface exposed to absorbable gas, and atomization of a liquid produces the largest possible surface to mass ratio, it was felt that absorption by this method would commercially possible and the results obtained confirmed this.
Approved for public release; distribution is unlimitedThis thesis document was issues under the authority of another institution, not NPS. At the time it was written, a copy was added to the NPS Library Collection for reasons not now known. It has been included in the digital archive for its historical value to NPS. Not believed to be a CIVINS (Civilian Institutions) title.
Showing items related by title, author, creator and subject.
Branscome, James R. (Monterey, California, Naval Postgraduate School, 1952);The purpose of this work was to test the applicability of atomization to absorption by means of a two-fluid or gas-atomization nozzle. Since absorption depends directly on the amount of liquid surface exposed to absorable ...
Guglielmi, John David (Monterey, California. Naval Postgraduate School, 1992-06);The atomization of a gelled boron slurry fuel using two commercially available airblast atomizers was studied at atmospheric pressure in non-reacting flow. The atomization of water was also characterized for comparison. ...
Krikellas, Dimitrios (Monterey, California. Naval Postgraduate School, 2003-12);An existing turbo-ramjet engine was modified in order to increase the produced thrust and sustain combustion at increased freejet Mach numbers. The engine's afterburner fuel system was redesigned to improve the vaporization ...