Lubrication study of an oscillating bearing.
Nelson, George G.
MetadataShow full item record
This investigation covers the regimes of operation of an unidirectionally loaded sleeve bearing. The particular journal studied was a hardened steel member oscillating through 30 , at various loads and speeds in a hardened steel bushing. From the results it was concluded that there were possibly four regimes of operation. The coefficient of friction with constant load and increasing speed was found to decrease and then to increase. Three methods were used in the investigation to determine the lubricating characteristics: friction measurement, oil film resistance, and radioactive tracer.
Showing items related by title, author, creator and subject.
Sanford, Edward "Judd" (Monterey, California: Naval Postgraduate School, 2013-06);Evidence obtained in this study shows that a successful CONOP product contains minimal informational requirements for approval and an effective CONOP procedure is supported by a targeting methodology with lower delegation ...
Hightaian, Gregory.; Keese, Howard C. (1987-09);An effective management information system is critical to the successful operation of any organization. In the large, complex organization of the Naval Air Rework Facility, the operation of such a system is a complex ...
Hansen, Harry James (Monterey, California. U.S. Naval Postgraduate School, 1966);The gear or lubricating oil test instrument described incorporates the four square principle in its design. This basic configuration is improved over like devices in that loading may be varied while the machine is in ...