Experimental determination of stresses in a ship's bottom structure.

View/ Open
Author
Card, James Conrad
Date
1970-05Advisor
Mansour, Alaa E.
Metadata
Show full item recordAbstract
An attempt is made to verify second order orthotropic
plate theory using a Plexiglas model loaded laterally
and in the plane of the plate. The design and construction
of the model, loading system, support system and
instrumentation are discussed in detail. The experiments did not verify second order orthotropic
plate theory. The main reason was the inability of the
boundary condition members to apply the designed boundary
conditions to the plate. Further attempts to verify
the theory are possible with the same apparatus if boundary
modifications are made.
Description
This thesis document was issued under the authority of another institution, not NPS. At the time it was written, a copy was added to the NPS Library collection for reasons not now known. It has been included in the digital archive for its historical value to NPS. Not believed to be a CIVINS (Civilian Institutions) title.
Collections
Related items
Showing items related by title, author, creator and subject.
-
ACS air bearing test-bed design
Glitt, Sascha (Monterey, California. Naval Postgraduate School, 2010); NPS-SP-10-001This thesis is about the construction and design of a new air bearing test-bed to verify the programmed ACS attitude control algorithm and to validate the ACS MATLAB/SimuLink¬ model of NPSAT1, the second small satellite ... -
Evaluation of energy-sink stability criteria for dual-spin spacecraft
Ortiz, Vincent Michael. (Monterey, California. Naval Postgraduate School, 1994-06);The nutational stability of a dual-spin, quasi-rigid, axisymmetric spacecraft containing a driven rotor is analyzed. The purpose is to examine a revised energy-sink stability theory that properly accounts for the energy ... -
Experimental investigation of ventilated cavities.
Kinnear, Richard James (Massachusetts Institute of Technology, 1968-05);A wedge with a 3.5 inch chord and a half-angle of 4.1 degrees is tested in the MIT Propeller Tunnel. No pulsations were observed on the cavity. Thus, the attempt to verify the theory that pulsations are possible in an ...