Show simple item record

dc.contributor.advisorSchacher, G.E.
dc.contributor.authorWeis, William Alan.
dc.date.accessioned2012-11-13T23:23:29Z
dc.date.available2012-11-13T23:23:29Z
dc.date.issued1971-06
dc.identifier.urihttp://hdl.handle.net/10945/15648
dc.description.abstractThis thesis was undertaken to ascertain the feasibility of producing an accurate phase measurement system using standard components normally available in the laboratory or those that could be purchased relatively inexpensively. Several systems are discussed and two of them were physically evaluated. It was concluded that it was not feasible to build an accurate system without large additional expense; however, if such expense is justifiable, recommendations are given for the construction of an improved system.en_US
dc.description.urihttp://archive.org/details/designevaluation00weis
dc.language.isoen_US
dc.publisherMonterey, California ; Naval Postgraduate Schoolen_US
dc.subject.lcshPhysicsen_US
dc.titleThe design and evaluation of a microwave phase measurement system.en_US
dc.typeThesisen_US
dc.contributor.departmentPhysics
dc.description.serviceMajor, United States Armyen_US
etd.thesisdegree.nameM.S. in Physicsen_US
etd.thesisdegree.levelMastersen_US
etd.thesisdegree.disciplinePhysicsen_US
etd.thesisdegree.grantorNaval Postgraduate Schoolen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record