Theses and Dissertations
Transverse forces on rough cylinders in harmonic flow
(Monterey, California. Naval Postgraduate School, 1977-03)
The transverse forces acting on smooth and sand-roughened circular cylinders immersed in an harmonically oscillating flow have been measured using a recently constructed U-shaped water tunnel.
The lift coefficients were ...
A finite element preprocessor for SAP IV and ADINA.
(Monterey, California. Naval Postgraduate School, 1977-09)
The primary purpose of this thesis was to provide a
method of checking the geometry and element connectivity
input data for two finite element programs, ADINA and
SAP IV. This preprocessor will accept the ADINA or SAP ...
Effects of thermomechanical processing on damping characteristics of martensitic Cu 13.5 w/o Al alloy for ship silencing application
(Monterey, California. Naval Postgraduate School, 1977-12)
Cu-Al alloys demonstrate a high damping capacity in the martensitic state. The specific damping capacity in the y' martensite of a Cu-13.5w/o Al alloy was found to vary with grain size. Since platelet length increased ...
Scanning electron microscope study of porous zinc battery electrode oxidation after service-like exposures in potassium hydroxide electrolyte.
(Monterey, California. Naval Postgraduate School, 1977)
Preliminary design and analysis of a total energy system for MIT
(Massachusetts Institute of Technology, 1977-09)
The total energy system concept has been proposed as a
possible means of reducing the cost of providing electricity
at MIT. An overview of key factors influencing the possible
shift to a total energy system approach is ...
Effects of several geometric parameters on the performance of a multiple nozzle eductor system.
(Monterey, California. Naval Postgraduate School, 1977)
Effects of thermo-mechanical processing on aluminum-magnesium alloys containing high weight percentage magnesium.
(Monterey, California. Naval Postgraduate School, 1977)
An assessment of thermal energy storage and waste heat dissipation with total energy systems for MIT.
(Massachusetts Institute of Technology, 1977)
Design of an electrohydraulic wave follower system.
(1977)
An electrohydraulic wave follower capable of positioning a 25.0 LB
instrumentation package at a constant height above the instantaneous
sea surface was designed. A derrick to move the system from the deck
of the R/V ...
Assessment of fuel cells and pressurized water nuclear reactors for submarine propulsion.
(Massachusetts Institute of Technology, 1977)
Refine By:
Advisor
Author
Branch Of Service
Date Issued
-
1977 (33)
Degree
Department
-
Mechanical Engineering (33)