Theses and Dissertations
Measurement and analysis of spark ignition engine pressure data to determine heat release profiles.
(Massachusetts Institute of Technology, 1984)
Combustion modeling of a two cylinder cycle reciprocating engine.
(Massachusetts Institute of Technology, 1984)
Torsional buckling of I beam and flat bar stiffeners under combined lateral and axial loading
(Monterey, California. Naval Postgraduate School, 1985)
The attenuation of flexural waves in mass loaded beams.
(Massachusetts Institute of Technology, 1985)
Predicted heat transfer loss in the expansion cylinder of a two cylinder cycle reciprocating engine.
(Massachusetts Institute of Technology, 1984)
Preliminary mechanical redesign of an existing gas-turbine engine to incorporate a high-efficiency, low-pressure-ratio, highly-regenerative cycle for marine applications
(Massachusetts Institute of Technology, 1984)
Real time sensing and control of out-of-plane distortion due to line heating by laser.
(Massachusetts Institute of Technology, 1984)
The residual strength of a ship after an internal explosion
(Monterey California. Naval Postgraduate School, 1988)
An internal airblast from a missile explosion produces tearing, holing and dishing of ship's structural plating. In order to analyze the residual strength of a ship after an internal explosion, a typical ship compartment ...
Refine By:
Advisor
Author
Date Issued
Degree
Department
-
Mechanical Engineering (10)
-
Naval Architecture and Marine Engineering (10)