Theses and Dissertations
Superplasticity in a thermo-mechanically processed aluminum-10.2%Mg-0.52%Mn alloy.
(Monterey, California. Naval Postgraduate School, 1984)
Numerical analysis of the elastic shock response of submarine installed equipment.
(Monterey, California. Naval Postgraduate School, 1984)
Overall heat transfer coefficients for a horizontal cylinder in a fluidized bed.
(Pennsylvania State University, 1984)
Effect of friction and control parameters on the tracking accuracy of a target seeker
(1987-12)
The tracking accuracy of a missile target seeker depends on many variables. For
a target seeker using a gimbaled platform, an important variable is the friction induced
by the preloaded bearings, and by the short wires ...
Measurement and analysis of spark ignition engine pressure data to determine heat release profiles.
(Massachusetts Institute of Technology, 1984)
The design of a test procedure for the measurement of acoustic damping of materials at low stress.
(Monterey, California. Naval Postgraduate School, 1983-09)
A procedure for measuring the viscous damping of relatively
large plate material (up to 40 inches x 14 inches x
2
inches) was developed utilizing the Hewlett-Packard 5451C
Fourier Analyzer and impulse hammer technique ...
Finite element grid optimization.
(Monterey, California. Naval Postgraduate School, 1983)
Effects of preheat on weldments of NICOP steel
(Monterey, California. Naval Postgraduate School, 1983-09)
Shielded metal arc weldments of Armco Steel Corporation's
NICOP class 3, 19mm (3/4 inch) plate, conforming to ASTM A710
grade A, were studied to provide information concerning the
microstructure in the heat affected ...
Effect of shroud geometry on the effectiveness of a short mixing stack gas eductor model.
(Monterey, California. Naval Postgraduate School, 1983-06)
An existing apparatus for testing models of gas eductor
systems using high temperature primary flow was modified to
provide improved control and performance over a wide range of
gas temperature and flow rates. Secondary ...
Refine By:
Advisor
Author
Branch Of Service
Date Issued
Degree
Department
-
Mechanical Engineering (2040)