Stiffness of stepped bars
Doyle, Dennis Michael
MetadataShow full item record
The stiffness of stepped bars is determined by calculating deflections due to applied loads using the finite element method. Nine combinations of step height and fillet radius are studied for each of the following cases: 1. rectangular cross section of axial load; 2. rectangular cross section under bending load; 3. circular cross section under axial load; 4. circular cross section under torsional load. A correction parameter actually a fictitious axial displacement of the step, is derived. It makes possible accurate calculation of deflections of stepped bars using elementary formulas.
Approved for public release; distribution is unlimited
Showing items related by title, author, creator and subject.
Huang, Jen-Chih (Monterey, California. Naval Postgraduate School, 1994-09);High range resolution radar sytems have many advantages such as target classification, resolution of multiple target, accurate range profile and detection of low radar cross section (RCS) targets in clutter. High range ...
Ma, Yu-Bin (Monterey, California. Naval Postgraduate School, 1995-12);As compared to the commonly used constant frequency radar waveforms, the stepped-frequency waveform can achieve high range resolution while still retaining the advantages of lower instantaneous receiver bandwidth and lower ...
Design criteria for DC link filters in a synchronous generator-phase controlled rectifier-filter-load system Greseth, Gregory J. (Monterey, California: Naval Postgraduate School, 1999-06);Power electronics have advanced to the point that they can be considered for use in large, high power dc electrical distribution systems. The proposed Navy DC Zonal Electrical Distribution System (DC ZEDS) being designed ...