A study of pressure-volume rates and plenum membrane additions to the captured air bubble surface effect ship XR-3 digital computer loads and motion program
Boggio, John Martin
MetadataShow full item record
A study was conducted of modeling changes to the XR-3 Captured Air Bubble Surface Effect Ship digital computer Loads and Motion program. These changes included the addition of pressure rate and volume rate to the existing 6 degrees of freedom equations. Additional equations were developed to simulate the application of a nonpermeable membrane to the plenum of the XR-3 test craft. The objectives of this study were to determine whether the addition of pressure rate and volume rate equations would improve computer execution time and to test some simplified models of the plenum membrane. Computer timing improvements were demonstrated and membrane modeling results are presented.
Approved for public release; distribution unlimited
Showing items related by title, author, creator and subject.
Casey, William Emerson (1990);A model which describes the thermal-hydraulic behavior of a packed particle bed reactor fuel element is developed and compared to a reference standard. The model represents a step toward a thermal-hydraulic module for a ...
Hermanson, Michael W. (Monterey, California. Naval Postgraduate SchoolUniversity of Florida, 2003-12);were tested at 8 different wave periods ranging from 0.5 seconds to 1.2 seconds and each test was performed twice. Thus, 72 combinations were examined and approximately 150 flume runs were completed to collect data for ...
Kolar, R.; Whittinghill, C.; Agrawal, B.N. (2001);Inflatable structures are effective in space applications, as they are weight, volume and cost competitive For certain space applications, higher gains are obtained for the antennas by increasing their size. Higher gains ...