Multichannel data transmission through a fiber optic cable.
multichanneldata00hatz.pdf (4.363Mb)Abstract
The objective of this thesis was to design and construct a
system which transmits and receives data from different analog
channels through a single fiber optic cable link. The system
uses a microprocessor controlled multiplexer and a high speed
analog-to-digital converter. Tests and measurements were
performed to examine the restrictions, problems and different
options on the various components of the system. Based on the
above, a trade-off analysis was performed for the bandwidth
and the number of channels.
Rights
Copyright is reserved by the copyright ownerCollections
Related items
Showing items related by title, author, creator and subject.
-
Active Control of Adaptive Optics System in a Large Segmented Mirror Telescope
(2012);For a large Adaptive Optics (AO) system such as a large Segmented Mirror Telescope (SMT), it is often difficult, although not impossible, to directly apply common Multi-Input Multi-Output (MIMO) controller design methods ... -
Spin stabilization of the ORION satellite using a thruster attitude control system with optimal control considerations
(Naval Postgraduate School, 1989);The controlled system is the ORION satellite spinning about its single axis of symmetry. Hydrazine thrusters are used as the control and are modeled by ideal, constant magnitude step functions. The system is normalized and ... -
Acquisition and Development Programs through the Lens of System Complexity
(Monterey, California. Naval Postgraduate School, 2018-04-30); SYM-AM-18-165The approach of the Department of Defense (DoD) to acquisition programs is strongly based on systems engineering. DoD Directive 5000.01 calls for "the application of a systems engineering approach that optimizes total ...
