Root placement with transfer function methods (full state feedback)
Thaler, George Julius
Titus, Harold A.
MetadataShow full item record
A design technique for root placement with full state feedback using transfer functions for all-pole plant is presented in this thesis. A number of examples are presented to demonstrate the procedure with this design technique when all the system states are available to be measured and fedback. The design procedure presented is applicable for linear, time invariant (LTI) systems in the s-domain for continuous time. In order to get the roots at desired locations by transfer function methods very high gains are required. Therefore, the design procedure should place the zeros in offset locations. To obtain some guidelines for offsetting the zeros, the root movement as a function of gain, offset zero locations chosen by matrix methods to put the roots at the desired locations, and arbitrarily chosen offset zero locations are observed on numerous system examples. The obtained guidelines are applied to the all-pole plants.
RightsCopyright is reserved by the copyright owner.
Showing items related by title, author, creator and subject.
Laser-Doppler velocimetry and viscous computation of the flow through a compressor cascade near stall Williams, Andrew John Harold (Monterey, California. Naval Postgraduate School, 1995-06);Laser-Doppler velocimeter measurements were made in the flow field of a stalled cascade of controlled-diffusion stator blades. Tests were conducted at 10 degrees of incidence above the design inlet-flow angle in order to ...
Calero, D.; Paul, S.; Gesing, A.; Alves, F.; Cordioli, J.A. (BioMed, 2018-02);Most commercially available cochlear implants and hearing aids use microphones as sensors for capturing the external sound field. These microphones are in general located in an external element, which is also responsible ...
Nakagawa, Gordon R. (Monterey, California. U.S. Naval Postgraduate School, 1967-12);Since the introduction of parameter plane techniques by Siljak in 1964, much effort has been devoted to the application of these techniques to various control system problems. This paper concerns the application of parameter ...