Simulation and performance analysis of routing in SONET/SDH Data Communications Network (DCN)
Loh, Kuan Chou.
McEachen, John C.
Borchardt, Randy L.
MetadataShow full item record
This thesis analyzes the ITU-T G.7712 standard to evaluate the main features and specifications that are defined in the 11/2001 edition. The latest 03/2003 revision was also reviewed to determine what are the changes and latest update presented in that paper. In order to find out the compliance among telecommunication industry vendors, surveys were also conducted to determine which is the most widely supported standard. Finally, simulations were run using Opnet IT Guru software for the two routing protocols defined in the standard, ISIS and OSPF to examine of their characteristics and determine their usefulness. It was observed that OSPF achieves better performance and is the least obtrusive on network operations.
Showing items related by title, author, creator and subject.
Evaluation of hardware and software for a Small Autonomous Underwater Vehicle Navigation System (SANS) Norton, Nancy Ann (Monterey, California. Naval Postgraduate School, 1994-09);The purpose of this thesis is to evaluate the hardware and software for a Small Autonomous Underwater Vehicle (AUV) Navigation System (SANS), a self-contained, externally mountable navigation system. The SANS is designed ...
Muschek, Richard C. (Monterey, California. Naval Postgraduate School, 1998-03);The first goal of this project was to determine the mechanical properties of countermine boots and protective overboots that are currently available to U.S. soldiers. The second goal of this project was to conduct a ...
Analysis of a single-degree-of-freedom roll motion model: simulation, sensitivity study, and comparison to multi-degree-of-freedom models. Sahler, Erica. (Monterey, California. Naval Postgraduate School, 1996);This study models roll motion response of a barge subjected to beam sea conditions as a single degree of freedom system. The measured wave, either regular or random, is input into a computer program which uses a fourth ...