Computer implementation of Arnott's formulaton of thermoacoustics using MATLAB
Gamaletsos, Argirios L.
Atchley, Anthony A.
Gaitan, D. Felipe
MetadataShow full item record
This thesis describes a Matlab computer program that implements Arnott's formulation of thermoacoustics W.P. Arnott , et al, General formulation of thermoacoustics for stacks having arbitrarily shaped pore cross sections , J. Acoustic. Soc. Am. 90 (6), 3228-3237 (1991). The program calculates the resonance frequency and quality factor of a thermoacoustic prime mover below onset of self-oscillation. The results of this analysis are compared to measured values for both a closed end and an open end prime mover and to predictions of a standing wave analysis of prime movers A.A Atchley, Standing wave analysis of a thermoacoustic prime mover below onset of self-oscillation, J. Acoustic. Soc. Am. 92(5), 2907-2914 (1992)
Approved for public release; distribution is unlimited
Showing items related by title, author, creator and subject.
Yang, Szu-Wei (Monterey, California. Naval Postgraduate School, 1995-06);The topic of this thesis is the design of a toroidal prime mover. The primary design tool is a MATLAB program based on a standing wave analysis of thermoacoustics. A conventional prime mover that has been well studied, was ...
Lin, Hsiao-Tseng (Monterey, California. Naval Postgraduate School, 1997-09);The dissertation constitutes the first detailed theoretical and experimental investigation of a thermoacoustic prime mover with periodic boundary conditions. There are five significant aspects to this research: (1) using ...
Salindong, Arthur R.; Hebert, David D. (Monterey, California. Naval Postgraduate School, 1996-12);The purpose of this thesis is to provide data on the evolution of the temperature profile in a simple thermoacoustic stack. These measurements are made to support the development of nonlinear time-dependent models of ...