A level density analyzer for shipboard RFI measurements
Arneson, Dennis C.
Ohlson, John E.
MetadataShow full item record
The design and construction of a Level Density Analyzer for use in the measurement of shipboard RADIO FREQUENCY INTERFERENCE consisted of integrating various analog and digital integrated circuits and related electronic components to enable accurate level analysis of a broad range of analog signals including noise and/or electromagnetic waves which constitute radio frequency interference. The overall design and system goals were to be able to adequately sample an analog signal, classify it, convert the classification to digital data and provide outputs to be logged either by manual or magnetic tape means. The design and construction efforts efficiently and economically achieved these goals
RightsThis publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.
NPS Report NumberNPS-62OL76107
Showing items related by title, author, creator and subject.
The design and implementation of a digitally programmable GIC filter Kubicki, Adam R. (Monterey, California: Naval Postgraduate School, 1999-09);In this research, the design and implementation of an integrated circuit, digitally programmable, analog to analog filter are presented. By functioning in the analog domain the quantization errors and hardware requirements ...
The design, simulation, and fabrication of a VLSI Digitally Programmable GIC filter Lee, Ralph D. (Monterey, California. Naval Postgraduate School, 2000-12);In this research, the design, simulation and mask layout for a VLSI Digitally Programmable Generalize Impedance Converter (GIC) Filter is presented. Programmable elements are filter type (low-pass, high-pass, band-pass and ...
Analog-to-digital signal processing in a prototype SATCOM signal analyzer Ohlson, John Everett; Zell, William B. (Monterey, California. Naval Postgraduate School, 1979-12); NPS-62-79-015PRA prototype SATCOM Signal Analyzer (SSA) has been designed which performs spectral analysis on transponder signals from the Navy's UHF communications satellites. As an integral part of the SSA, the Analog to Digital ...