A random tour process of known length between known end points
Forrest, R. N.
MetadataShow full item record
This report describes a two dimensioal stochastic process and a program for its simulation. The process can be considered to describe a random track of predetermined length that originates and terminates at predetermined end points. The process is a modification of a process that is without the length and termination constraints. A particular process is defined by the track length, the maximum expected track segment length and the distance between the end points. For motion at a constant speed, the track length constraint is equivalent to a transit time constraint. In Section 2, the process and the unmodified process are described and some of their characteristics are discussed. In Section 3, the simulation program is described. By using the program, graphs and data can be produced that represent realizations of the process. The program, which is written in BASIC, is for an HP-85
NPS Report NumberNPS71-83-001
Showing items related by title, author, creator and subject.
Naval Postgraduate School Center for Homeland Defense and Security (CHDS) (Monterey, California. Naval Postgraduate SchoolCenter for Homeland Defense and Security, 2010-05);May 2010. Academic homeland security programs have proliferated in the past eight years, with more than 270 colleges and universities in the United States offering certificates and degrees in homeland security and related ...
Brown, R. Edward (1978-06);A procedure is described to determine lateral buckling loads for initially straight beams. Loading and beam geometry may vary along the length. Warping rigidity is not considered. End conditions of considerable generality ...
Hutchison, William Edwin (University of Maryland, 1967);An approach to a force level problem which incorporates inputs of cost, operational effectiveness and requirements into a decision procedure is suggested. The problem is then defined within the framework of a decomposable ...