On the Impedance of a Radiating Circuit
Chaney, Jesse Gerald
MetadataShow full item record
In applying the formula for the driving point impedance of a radiating electric circuit, as given by the generalized circuit method, it is ^ found that additional terms must be. included. These terms are required to account for the negative spatial rate of change at which the reactive Power is being returned into the wire from the localized principal wave, retardation being neglected. In the case of a biconical antenna, it is demonstrated that these terms are cancelled by choosing a proper procedure of integration. However, these terms must be retained in the case of a radiating transmission line. The radiation impedance of a parallel wire line is given and is uniformly distributed along the line. The added attenuation due to radiation losses is considered in the determination of the driving Point impedance of the line. The latter procedure is applicable to a terminated rhombic antenna provided due c ognizance is taken of the non-uniformity of the line.
NPS Report NumberTechnical Report No. 9
Showing items related by title, author, creator and subject.
Bryant, Michael Lynn (Monterey, California. Naval Postgraduate School, 1973-06);This paper is an application of the Piecewise-Sinusoidal Reaction Matching Technique (PSRMT) to linear, parallel thin-wire dipoles. The "method of moments" if briefly outlined and the fundamental electromagnetic ...
Yeo, Chee Beng (Monterey, California. Naval Postgraduate School, 2002-03);In the classical approach of antenna theories, mutual coupling between elements is usually ignored. However, depending on the application, errors due to mutual coupling can be significant. This thesis investigates the ...
Layl, Jerry Neal (Monterey, California. Naval Postgraduate School, 1972-06);The coaxial TEM-line antenna is a low-profile, lightweight, simply constructed antenna that can be easily mounted on a wide variety of conducting surfaces. It is a low to medium gain antenna element capable of operation in ...