Bezier curve fitting
Pastva, Tim A.
Borges, Carlos F.
MetadataShow full item record
We typically think of fitting data with an approximating curve in the linear least squares sense, where the sum of the residuals in the vertical, or y, direction is minimized. The problem addressed here is to fit a Bezier curve to an ordered set of data in the total least squares sense, where the sum of the residuals in both the horizontal and vertical directions is minimized.
Showing items related by title, author, creator and subject.
To investigate the use of brittle lacquer in measuring quantitatively the residual strains in metal plates Acuff, James T.; Farley, Robert J.; Acuff, James T.; Farley, Robert J. (Rensselaer Polytechnic Institute, 1948-08);The object of this investigation is to determine the possibility of measuring quantitatively the residual stresses in metal plates by means of brittle lacquer. It is known that the residual stresses can be determined ...
Systematic review of ultrasonic impact treatment parameters on residual stresses of welded non-sensitized versus sensitized aluminum-magnesium Fakhouri, Eid Faiz (Monterey, California: Naval Postgraduate School, 2015-03);This thesis focuses on the use of x-ray diffraction to measure residual stresses around welds in 5XXX series aluminum-alloys used in naval ship structures both in the laboratory and the field. Tensile residual stresses are ...
Banazwski, Brian J. (Monterey, California. Naval Postgraduate School, 2011-12);This thesis examines the interplay of residual stress distributions caused by welding and laser peening of marine aluminum alloy 5083. Residual stresses at welds in this alloy can cause fatigue and stress corrosion cracking ...