Nucleate boiling heat transfer study of direct immersion cooling of a 3x3 array of vertically orientated electronic components in a dielectric fluid
Arata, Frank A.
MetadataShow full item record
Direct application of two-phase heat transfer in the liquid cooling of electronic components in fluorinated hydrocarbons (FC-72), is severely inhibited by the excessive amount of superheat required to initiate nucleate boiling. This phenomenon is well documented. To experimentally study the effects of nucleate pool boiling, a test chamber was constructed. This chamber utilized a substrate with nine chips on it and a platinum wire of 0.05 mm diameter. The wire was progressively heated to produce a plume of increasing intensity. A study was made of the effects of the boiling wake from the wire on the heat transfer from the chips.
Approved for public release, distribution unlimited
Showing items related by title, author, creator and subject.
Yusician, Joseph E. (Monterey, California. Naval Postgraduate School, 1993-12);An investigation of the interaction effects of a lower heated tube on pool boiling of pure R-124 from an upper horizontal tube was conducted at a saturation temperature of 2.2 deg C. The test tubes used were: (1) smooth ...
Egger, Robert A. (1991);Direct application of two-phase heat transfer in the liquid cooling of electronic components in flouorinated hydrocarbons (FC-72), is severely inhibited by the excessive amount of superheat required to initiate nucleate ...
Turk, Ugur (Monterey, California. Naval Postgraduate School, 1995-12);In the present study, boiling of highly wetting dielectric fluid has been investigated in an oscillating Fluid environment. A piston is designed to create oscillations in the fluid and over a heated platinum wire. Because ...