The effect of mixing methods on the dispersion of carbon nanotubes during the solvent-free processing of multiwalled carbon nanotube/epoxy composites

Download
Author
Gupta, Murari L.
Sydlik, Stefanie A.
Schnorr, Jan M.
Woo, Dong Jin
Osswald, Sebastian
Swager, Timothy M.
Raghavan, Dharmaraj
Date
2013Metadata
Show full item recordAbstract
Several solvent-free processing methods to disperse multiwalled carbon nanotubes (MWCNTs) in bisphenol F-based epoxy resin were investigated, including the use of a microfluidizer (MF), planetary shear mixer (PSM), ultrasonication (US) and
combinations. The processed mixture was cured with diethyl toluene diamine. Three complimentary techniques were used to
characterize the dispersion of the MWCNTs in cured composite samples: optical microscopy, micro Raman spectroscopy, and scanning electron microscopy (SEM). For sample MF þ PSM, optical micrographs and Raman images showed reduced agglomeration and a homogeneous distribution of MWCNTs in the
epoxy matrix. SEM analysis of fractured specimen after tensile testing revealed breakage of nanotubes along the fracture surface of the composite. A comparison of the MWCNT dispersion in the epoxy samples processed using different methods showed that a combination of MF and PSM processing yields a more homogeneous sample than the PSM or US þ PSM processed samples. Mechanical testing of the composites showed about 15% improvement in the tensile strength of samples processed by the MF þ PSM method over other methods. Thermogravimetric analysis (TGA) results showed a small decrease in the onset degradation temperature for poorly dispersed samples produced by PSM compared with the well-mixed samples (MF þ PSM). These
results strongly suggest that the MF þ PSM processing method yield better-dispersed and stronger MWCNT/epoxy composites.
Description
The article of record as published may be found at: http://dx.doi.org/10.1002/polb.23225
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.Collections
Related items
Showing items related by title, author, creator and subject.
-
Fluid Structure Interaction Effects on Composites Under Low Velocity Impact
Conner, Ryan P. (Monterey, California. Naval Postgraduate School, 2012-06);In this study composite materials were tested in different fluid environments to determine the role of Fluid Structure Interaction with these composites under a lower velocity impact. The purpose of this research is to ... -
Effects of Carbon Nanomaterial Reinforcement on Composite Joints Under Cyclic and Impact Loading
Tan, Meng Hwee (Monterey, California. Naval Postgraduate School, 2012-03);This study investigated the influence of Multi-Walled Carbon Nanotubes (MWCNTs) and Carbon Nanofibers (CNFs) reinforcement on the behavior of Carbon Fiber Reinforced Polymer (CFRP) joint interface under cyclic and impact ... -
Microstructural effects of multiple passes during friction stir processing of nickel aluminum bronze
Nelson, Elizabeth A. (Monterey, California. Naval Postgraduate School, 2009-12);Friction Stir Processing (FSP) is an emerging technology based on Friction Stir Welding that allows the near surface regions of a material to be selectively processed to improve the material properties. Single and multiple ...