Distortion of annealing twins during the initial equal channel angular pressing pass
Zhilyaev, A. P.
Raab, G. I.
McNelley, T. R.
MetadataShow full item record
The heterogeneous deformation of annealed copper subjected to one equal channel angular pressing pass was studied by scanning electron microscopy. Distinctly inhomogeneous deformation of prior annealing twins by interpenetrating slip bands was observed and some twin-matrix interfaces displayed stair-like offsets. The intense local deformation within the annealing twins exhibits characteristics of dislocation slip and not deformation twinning.
Showing items related by title, author, creator and subject.
Production of ultra-fine grains and evolution of grain boundaries during severe plastic deformation of aluminum and its alloys Swisher, Douglas Lee (Monterey, California. Naval Postgraduate School, 2000-12);Equal channel-angular pressing (ECAP) is a recently developed method for deformation processing of material that can produce an ultra-fine grain structure in bulk material through severe plastic deformation. This study ...
Meyers, M.A.; Xu, Y.B.; Xue, Q.; Pérez-Prado, M.T.; McNelley, T.R. (Elsevier, 2003);Shear bands were generated under prescribed and controlled conditions in an AISI 304L stainless steel (Fe-18%Cr-8%Ni). Hat-shaped specimens were deformed in a Hopkinson bar at strain rates of ca 104 s-1 and shear strains ...
Meyers, M.A.; Perez-Prado, M.T.; Xue, Q.; Xu, Y.; McNelley, T.R. (American Institute of Physics, 2001);Shear bands were generated under prescribed and controlled conditions in stainless steel (Fe- 18%Cr-8%Ni). Hat-shaped specimens, deformed in a Hopkinson bar were used, yielding strain rates of approximately 104s-1 and ...