Warm layer and cool skin corrections for bulk water temperature measurements for air-sea interaction studies"
Alappattu, Denny P.
Lind, Richard J.
Christman, Adam J.
MetadataShow full item record
The sea surface temperature (SST) relevant to air-sea interaction studies is the temperature immediately adjacent to the air, referred to as skin SST. Generally, SST measurements from ships and buoys are taken at depths varies from several centimeters to 5 m below the surface. These measurements, known as bulk SST, can differ from skin SST up to O(18C). Shipboard bulk and skin SST measurements were made during the Coupled Air-Sea Processes and Electromagnetic ducting Research east coast field campaign (CASPER-East). An Infrared SST Autonomous Radiometer (ISAR) recorded skin SST, while R/V Sharp’s Surface Mapping System (SMS) provided bulk SST from 1 m water depth. Since the ISAR is sensitive to sea spray and rain, missing skin SST data occurred in these conditions. However, SMS measurement is less affected by adverse weather and provided continuous bulk SST measurements. It is desirable to correct the bulk SST to obtain a good representation of the skin SST, which is the objective of this research. Bulk-skin SST difference has been examined with respect to meteorological factors associated with cool skin and diurnal warm layers. Strong influences of wind speed, diurnal effects, and net longwave radiation flux on temperature difference are noticed. A three-step scheme is established to correct for wind effect, diurnal variability, and then for dependency on net longwave radiation flux. Scheme is tested and compared to existing correction schemes. This method is able to effectively compensate for multiple factors acting to modify bulk SST measurements over the range of conditions experienced during CASPER-East.
The article of record as published may be found at https://doi.org/10.1002/2017JC012688
Showing items related by title, author, creator and subject.
Warm Layer and Cool Skin Corrections for Bulk Water Temperature Measurements for Air-Sea Interaction Studies Alappattu, Denny P.; Wang, Qing; Yamaguchi, Ryan; Lind, Richard J.; Reynolds, Mike; Christman, Adam J. (2017-05);The sea surface temperature (SST) relevant to air-sea interaction studies is the temperature immediately adjacent to the air, referred to as skin SST. Generally, SST measurements from ships and buoys are taken at depths ...
Generating accurate skin sea surface temperature data from observations made using multiple platforms during CASPER field experiment Alappattu, Denny P.; Wang, Qing; Yamaguchi, Ryan; Lind, Richard J.; Christman, Adam J.; Shearman, Kipp; Fernando, Harindra Joe; Khelif, Djamal; Savelyev, Ivan (Monterey, California. Naval Postgraduate School, 2017-06); NPS-MR-17-001The east coast field campaign of Coupled Air-Sea Processes and Electromagnetic ducting Research (CASPER) was conducted in the fall of 2015 offshore of Duck, North Carolina. CASPER observations were conceived to better our ...
Shreeve, Raymond P. (Monterey, California. Naval Postgraduate School, 1973-11); NPS-57Sr73112AA full account is given of a test program to evaluate a prototype "Hybrid" compressor, wherin the flow is turned through 180[degrees] (from axial to radial to axial) within the rotor. The initial stator, or diffuser, ...