ASSESSMENT ON RADIATED SUSCEPTIBILITY TESTING WITHIN THE DOD AND INDUSTRY
Solis, Carlos G.
Carlson, Ronald R.
Yakimenko, Oleg A.
MetadataShow full item record
The war on terrorism has been a major driving factor for warfighter use of commercial off-the-shelf (COTS) items. Multiple COTS products have been introduced in the field that have been tested to industry standards, immunity testing, rather than to Department of Defense (DoD) military standards—a subset for Electromagnetic Environmental Effects (E3) testing called Radiated Susceptibility (RS) 103 testing, and External Radio Frequency Electromagnetic Environment (External RF EME) testing. The DoD needs to determine the minimum acceptable test for radiated susceptibility (RS)/Immunity in order to determine the risk, if any, to the operators using these products in the field. Many of the COTS products that have been introduced for DoD use were purportedly assessed to a military specification while being tested to an industry test. This thesis assesses the difference between DoD and industry RS/Immunity testing to determine the worst-case test scenario for ground systems.
RightsCopyright is reserved by the copyright owner.
Showing items related by title, author, creator and subject.
Doskey, Teresa; Johnson, Stacylee (Monterey, CA; Naval Postgraduate School, 2018-12);As is arguably common knowledge among defense procurement professionals, the Department of Defense (DoD) acquisitions process is slow, expensive, and inefficient. Since 1990, the Government Accountability Office (GAO) has ...
Fahey, John Michael (Monterey, California : Naval Postgraduate School, 1979-06);Double-exposure holograms were made of aluminum 2024-T4 rectangular plates. The double-exposure technique was applied to an aluminum plate in a nonflawed and then a flawed condition. Results of these experiments, comparing ...
Gladney, Dewey Clinton. (Monterey California. Naval Postgraduate School, 2004-09);Exploring semiconductor lifetime, reliability and performance is a never-ending science for today's modern electronics. One significant problem that affects all of these areas is radiation-induced damage. Making calculations ...