Static and Dynamic Buckling of a Fiber Embedded in a Matrix With Interface Debonding
MetadataShow full item record
Analyses were performed for static and dynamic buckling of a continuous fiber embedded in a matrix in order to determine effects of interfacial debonding on the critical buckling load and the domain of instability. A beam on elastic foundation model was used for the study. The study showed that a local interfacial debonding between a fiber and a surrounding matrix resulted in an increase of the wavelength of the buckling mode. An increase of the wavelength yielded a decrease of the static buckling load and lowered the dynamic instability domain. In general, the effect of a partial or complete interfacial debonding on the domain of dynamic instability was more significant than its effect on the static buckling load. For dynamic buckling of a fiber, a local debonding of size 10 to 20 percent of the fiber length had the most important influence on the domains of dynamic instability regardless of the location of debonding and the boundary conditions of the fiber. For static buckling, the location of a local debonding was critical to a free, simply supported fiber, but not to a fiber with both ends simply supported.
RightsThis publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.
Showing items related by title, author, creator and subject.
Effects of interfacial debonding and fiber breakage on static and dynamic buckling of fibers in matrices. Serttunc, Metin (Monterey, California. Naval Postgraduate School, 1992-09);Analyses were performed for static and dynamic buckling of a continuous fiber embedded in a matrix and fiber breakage in order to determine the effects of interfacial debonding on the critical buckling load and the domain ...
Nagashima, M.; Agrawal, B.N. (2012);For a large Adaptive Optics (AO) system such as a large Segmented Mirror Telescope (SMT), it is often difficult, although not impossible, to directly apply common Multi-Input Multi-Output (MIMO) controller design methods ...
Kwon, Y.W.; Darcy, J. (Springer, 2018);Failure criteria were proposed to describe physicsbased failure modes of the fibrous composite at its microscale level. The criteria consist of four failure modes at the constituent material level, and they are: fiber ...