A Status Report on the Development of a High Power UV and IR FEL at CEBA
MetadataShow full item record
Previously we presented a design for a kilowatt demonstration industrial UVFEL . Progress has been made in resolving several design issues identified in that work. More exact simulations of the injector have resulted in a better estimate of the injector performance. A more compact lattice has been designed meeting the design requirements for the UV FEL, and a new design point has been studied which greatly increases the threshold for longitudinal instabilities. A stability analysis of the RF control system has found that only minor modifications from the existing CEBAF controls will be necessary to allow them to be used with a high current, energy- recovery accelerator. Designs for the optical cavity length and figure control systems have been conceptualized and a model of the corner-cube resonator is being built and tested. Finally, three- dimensional simulations of the FEL have been carried out which show that the laser should exceed its minimum design goals for average power
RightsThis publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United States.
Showing items related by title, author, creator and subject.
Agrawal, B.N. (2005);This paper presents a review of the spacecraft design program at the Naval Postgraduate School. This program is part of the space systems engineering curriculum. In this curriculum, the students take at least one course ...
Feuerstein, M.; Agrawal, B.N. (1994);The AA4871 Spacecraft Design course is the capstone class for the M.S. in Astronautics at the Naval Postgraduate School. Thc design team integrated a Topaz If nuclear power system with an EOS Synthetic Aperture Radar to ...
Price, David J. (David Joseph) (Monterey California. Naval Postgraduate School, 2002);The thesis compares the analytical solution, two marine classification society design rules, and two design guides against experimental results for predicting the failure modes (general instability, axisymmetric buckling, ...