Impulse turbine flow analysis and correlation with experimental data turbine efficiency variation with proturbances in tailpipe
Putnam, Frederick Richard
MetadataShow full item record
It is the purpose of this paper to analyze the flow of combustion products through an exhaust-gas turbo-supercharger .,, It is also the purpose of this paper to investigate the flow downstream from the turbine rotor to the extent of determining exit velocities, and velocities in the flow path. The effect of such a flow disturbance will also be discussed with an eye to discovering what effect, if any, such a disturbance would have on the efficiency of the turbine.
This thesis document was issued under the authority of another institution, not NPS. At the time it was written, a copy was added to the NPS Library collection for reasons not now known. It has been included in the digital archive for its historical value to NPS. Not believed to be a CIVINS (Civilian Institutions) title.
Showing items related by title, author, creator and subject.
Greco, Philip Andrew (Monterey, California. Naval Postgraduate School, 1995-09);The redesign, data acquisition system installation, and software development for the cold-flow Turbine Test Rig is reported. The turbine tested was the Space Shuttle Main Engine High Pressure Fuel Turbopump first stage ...
Byrd, Andre E. (Monterey, California: Naval Postgraduate School, 2017-12);This work presents the design and simulation process of modernizing the Naval Postgraduate School's transonic compressor test rig (TCR). The TCR, which exists primarily for the purpose of testing axial fans at engine test ...
Cold flow simulation of the alternate turbopump development turbine of the space shuttle main engine high pressure fuel turbopump Rutkowski, Richard J. (Monterey, California. Naval Postgraduate School, 1994-03);Completion of the installation at the Naval Postgraduate School of a cold-flow test facility for the turbine of the Space Shuttle Main Engine High Pressure Fuel Turbopump is reported. The article to be tested is the first ...