Numerical study of implosion of shell structures
Abstract
To better understand the implosion and the resultant shock wave, a series of numerical modeling and simulations were undertaken for the buckling and collapse of spherical and cylindrical shell structures. The shells were assumed to be made of steel, aluminum, and laminated fibrous composites, respectively. First, the buckling was examined for the shell structures subjected to external pressure loading without any contact with fluid media. Both static and dynamic buckling was studied. For the dynamic buckling, the speed of collapse was controlled to investigate its effect on the buckling characteristics such as buckling mode. This was achieved by decreasing the internal pressure at different rates as the structures were subjected to a constant external pressure. Then, the full implosion process associated with the collapse of shell structures was modelled and studied to understand the shock wave propagation radiated from the collapsing shell structures. The structures were initially subjected to an external water pressure equivalent to a specified water depth. Then, the collapse speed of the shells was controlled, too. Finally, the effect of an initial defect on the buckling and implosion of cylindrical shells was examined. The numerical study compared the implosion characteristics resulting from spherical and cylindrical shells, different material properties, and various controlled collapse speeds. The results suggested that there were optimal parameters which generate the maximum peak pressure during the implosion process.
Description
17 USC 105 interim-entered record; under review.
The article of record as published may be found at http://dx.doi.org/10.1007/s41939-020-00078-y
Rights
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. Copyright protection is not available for this work in the United StatesCollections
Related items
Showing items related by title, author, creator and subject.
-
Comparison of analytical and numerical approaches for determining failure of ring-stiffened cylindrical shells
Temme, Michael W. (Monterey California. Naval Postgraduate School, 2003-06);The thesis compares the analytical solution, two marine classification society design rules, and numerical analysis against experimental results for predicting the failure modes (general instability, axisymmetric buckling, ... -
Dynamic buckling of shallow spherical caps subjected to a nearly axisymmetric step pressure load
Burt, John Alan (Monterey, California ; Naval Postgraduate School, 1971-09);The behavior of shallow spherical caps subjected to axisymmetric and nearly axisymmetric step pressure loads is examined using a digital computer program for the geometrically nonlinear analysis of arbitrarily loaded shells ... -
Dynamic Buckling of Shallow Spherical Shells
Ball, R.E.; Burt, J.A. (ASME, 1973-06);The dynamic behavior of clamped shallow spherical shells subjected to axisymmetric and nearly axisymmetric step-pressure loads is examined using a digital computer program for the geometrically nonlinear static and dynamic ...